1 data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s speci? cations are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical speci? cations because there is no space for detailed speci? cations. therefore, please approve our product speci? cations or transact the approval sheet for product speci? cations before ordering. http://www.murata.com/ 1 noise suppression products/emi suppression filters > emifil r (capacitor type) > single circuit type for large current 2011.11.2 o this data sheet is applied for chip emifil r used for general electronics equipment for your design. emifil r (capacitor type) single circuit type for large current nfm41p series (1806 size) c dimensions 1.50.3 4.50.3 0.7 min. (1) (3) (2) (2) 1.60.3 1.00.2 0.40.3 1.60.3 0.3 +0.3 C0.2 (in mm) : electrode c insertion loss characteristics (main items) frequency (mhz) insertion loss (db) (50 - 50 ) 1 10 100 1000 3000 0 20 40 60 80 100 nfm41pc155b1e3 nfm41pc204f1h3 c equivalent circuit input (output) (1) output (input) (3) (2) gnd no polarity. c packaging code packaging minimum quantity l 180mm embossed tape 4000 b bulk(bag) 500 c rated value ( p : packaging code) part number capacitance rated current rated voltage insulation resistance (min.) operating temperature range nfm41pc204f1h3 p 0.2f 80/-20% 2a 50vdc 1000m ohm -55 to +85c nfm41pc155b1e3 p 1.5f 20% 6a 25vdc 300m ohm -55 to +85c number of circuit: 1 c ! caution/notice ! caution (rating) do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. notice solderability of tin plating termination chip might be deteriorated when low temperature soldering pro? le where peak solder temperature is below the tin melting point is used. please con? rm the solderability of tin plating termination chip before use.
|